So, what is
better? Cleaning the accumulated dirt after it has made everything dirty or
stopping it before it damages everything? Most of you will say that obviously stopping
it before it harms the air. Well that exactly how a reverse air dust collector
function. It is basically equipment to control air pollution and is mainly
used by the industries which regularly emits toxic particles into the air
because of their industrial processes.
As per
technical definition, “A Reverse Air Dust Collector also known as reverse flow
baghouse and reverse flow fabric filter refers to a dust collector using a
reverse-air cleaning system to remove the collected dust particles from the surface of the filter media by backflushing the filter bags with a low-pressure
reversed flow.”
Meaning, the
dirty air before it is released outside flows through the baghouse which
captures the dirt particles and lets out the clean air after filtering them.
Like every other device, this baghouse also has its own set of pros and cons.
Here are some of its benefits to understand it better.
It is one of
the biggest benefits
of having reverse air dust collector systems. These systems have the
ability to collect a high amount of dust with better efficiency than most of the
other options available in the market... It meets the requirements of the
customers to a great extent.
Compartment
based
Normally the
baghouse has to shut down for cleaning purposes. So that the cleaning can be
done without damaging the equipment. However, in the case of reverse flow
baghouse, the equipment is basically divided into two compartments which makes
the cleaning easier and efficient as one does not have to shut the whole reverse
air dust collector while cleaning one section. So, the chances of harmful
particles getting released in the are the bare
minimum.
High
Temperature
You heard it
right. This reverse flow baghouse can be used at the places with high
temperatures because of its ability to withstand the higher temperatures. The
material can adhere to temperatures higher than 375 degrees which is itself is
a big number.
Compact Design
Most of the reverse air dust collector
are known for their compact as well as modern design. The feature has increased
its demand in the market by the industries. As they can make use of it without
disturbing their current industrial equipment to much extent.
Assembling
Yes, the dust collector does not come
in one piece and needs to be assembled at the site. However, the main positive
thing is that it does not take too much time for assembling. This saves a lot
of time and what everyone says, “Time is money, don’t waste time if you want to
have any.”
Reasonable Cost
Cost always
depends upon the company which is selling the product and it is a hard fact.
However, one thing which depends upon the product is supporting costs. For
example, maintenance or assembling. In the above two examples reverse flow
baghouse is a winner. As the maintenance and assembly cost is far lower than
the other options available in the market. Which makes it the most affordable
choice.
Low Residual
Residual is
something which comes with every equipment. However, the reverse air dust collector tends to
have a very low rate of dirt residual which reduces the high amount of dust
collection on the bags. Hence longer life of the bags.
Reverse Air Dust Collector |
Conclusion:
There are several types of air duct
collectors in the market which are basically designed to have clean air. Reverse
dust collector helps in keeping the air clean before it gets polluted which
is an efficient and less time-consuming process altogether?